Operating the Controls
Operating the Controls
Set-point
Information
1
Actual flame current
2
Actual supply temperature of the central heater
3
Actual return flow of the central heater
4
Actual temperature of the drinking-water
5
Water pressure
6
Type of use
7
Actual temperature of the flame pipe or TTB
8
Throughput speed of the drinking-water (Hz)
9
Current control-set-point
10
Current outside temperature (OTC-Temperature)
The set-point can be raised by 1 by quickly pressing
the 1 button (less than 1 second). When the
counter has reached its highest value, it will drop
down to 0.
II
L
E
D
2
T
a
s
t e
2
Installer-mode is exited by quickly pressing the 3
button (less than 1 second). The installer mode also
has a time out function that exits the installer mode
after one minute of inactivity. This function is also
turned off if the electrical supply is interrupted.
III
L
E
D
3
T
a
s
t e
3
6.3.10 Installer (+) Mode
The installer (+) mode can be activated by holding
the 2 button for longer than 3 seconds. The dis-
played information’s format is shown in the following
display.
II
L
E
D
2
T
a
s
t e
2
Display
Display Element
Parameter symbol alternates with the
index symbol. After changing the set-
point, it will appear after 2 seconds
Segment B
alternating
Parameter value for the chosen index
Segment B, C and D
Installer (+) Mode
LED 2 = Blinking
blinking
- 33 -
Gebr. Bruns GmbH is not responsible for typographical errors or technical inaccuracies and reserves the right to make adjustments.
Gebr. Bruns GmbH
•
Hauptstraße 200
•
26683 Saterland
•
Tel.: + 49 (0) 44 92 / 92 46-0
•
Fax: + 49 (0) 44 92 / 71 41
www.bruns-heiztechnik.de
•