Instruction Manual for Vertica-Homecare Bed
Page
44
4.5.2
Grab Handle (Triangular Handle)
A grab handle can be attached to the patient lifting pole (accessory, see
Chapter 8).
The resident can use this grab handle to sit up and readjust his/her position.
Check the grab handle and belt regularly for damage (see Chapter
3.1). Damaged grab handles or belts must be replaced immediately.
Service life:
We recommend that the triangular handle bar is replaced at least
every 5 years.
Please also refer to the detailed instruction manual supplied with
every grab handle.
Attachment
Attach the grab handle with the hand loop
to the trapeze bars/patient lifting pole.
Ensure that the integrated anti-slip device is
correctly fitted to the fixing points on the
trapeze bar.
HEIGHT ADJUSTMENT
Extend:
Pull the grab handle downwards (keep
button (1) pressed) and slide the strap slide (2)
downwards at the same time.
Shorten:
Hold the handle (keep button (1) pressed)
and slide the strap slide (2) upwards.
PARKING POSITION WHEN NOT IN USE
The grab handle can be hung over the trapeze bars/patient lifting pole. Ensure
that the grab handle cannot slip off accidentally.
1
2
Summary of Contents for Vertica-Homecare
Page 1: ...Instruction Manual Care bed with stand up function Vertica Homecare Date 2018 05 25 241335 v3...
Page 81: ...Instruction Manual for Vertica Homecare Bed Page 82 Notes...
Page 82: ...Instruction Manual for Vertica Homecare Bed Page 83 Notes...
Page 83: ...Instruction Manual for Vertica Homecare Bed Page 84...
