Instruction Manual for Vertica-Homecare Bed
Page
30
4.3.3.1
CPR
The shock position is only intended for medical emergencies and not
for daily use!
-
This function demands the user’s utmost attention since various
adjustments are activated simultaneously.
-
If this warning is disregarded:
- Patients and other people may be exposed to danger.
- Damage to property may occur!
This emergency function can only be activated when the stand-up
function is active.
It is also possible to adjust to the CPR position when the normal
adjustment function is locked on the patient handset, or the height
adjustment has been electronically limited.
The CPR position allows all parts of the mattress base to be lowered quickly,
particularly for resuscitation purposes. It is also suitable for moving the bed to a
specific low position for the patient to sleep at night (fall prevention).
The adjustment position is preset in the factory:
o
Backrest and thigh rest horizontal, simultaneously
o
Mattress base horizontal and in the lowest position
4.3.4
Preparing the Stand-Up Function
Depending on the level of mobilisation planned for the patient, it might be
necessary to completely remove the footboard [20] and to swing the side panel
[17] towards the mobilisation supports.
This preparation is always necessary if the patient is going to stand up; however, if
only a sitting position is to be set at most, this preparation is not necessary.
Summary of Contents for Vertica-Homecare
Page 1: ...Instruction Manual Care bed with stand up function Vertica Homecare Date 2018 05 25 241335 v3...
Page 81: ...Instruction Manual for Vertica Homecare Bed Page 82 Notes...
Page 82: ...Instruction Manual for Vertica Homecare Bed Page 83 Notes...
Page 83: ...Instruction Manual for Vertica Homecare Bed Page 84...
