Instruction Manual for Vertica-Homecare Bed
Page
43
4.5
A
TTACHMENTS
4.5.1
Adaptor Sleeves for Patient Lifting Pole / Infusion Stands
The head section has holders
[7]
on both
sides for a patient lifting pole or infusion
stand.
A reduction piece
[R]
of plastic is in one of
the holders. This is required if an infusion
stand is used.
This bushing must be removed before the
patient lifting pole can be inserted into the
sleeve.
The maximum loading capacity at the front end of the patient lifting
pole is 75 kg.
The patient lifting pole is not suitable for rehabilitation exercises.
Pay attention to door clearances when moving beds with patient
lifting poles or infusion stands attached.
A grab handle (accessory) is normally attached to the patient lifting
pole.
See the description provided on the following page.
To insert
Insert the long, straight end of the patient lifting pole into an adaptor sleeve
[7]
.
The metal pins must slot into the sleeve recesses and engage.
To remove
Remove the patient lifting pole/infusion stand straight upwards.
7
R
Summary of Contents for Vertica-Homecare
Page 1: ...Instruction Manual Care bed with stand up function Vertica Homecare Date 2018 05 25 241335 v3...
Page 81: ...Instruction Manual for Vertica Homecare Bed Page 82 Notes...
Page 82: ...Instruction Manual for Vertica Homecare Bed Page 83 Notes...
Page 83: ...Instruction Manual for Vertica Homecare Bed Page 84...
