burmeier Dali Instruction Manual Download Page 9

Page: 9 / 132

Conventions of this Instruction
Manual

3.1

Safety Information

WARNING

CAUTION

ATTENTION

At the time of delivery, the Dali care bed represents state-of-the-art technology and has been
tested by an independent testing institute.

Only use the Dali care bed if it is in perfect working order.

Explanation of the Safety Symbols Used

In this instruction manual, safety information is displayed in the following way:

WARNING

•

WARNING indicates a potentially hazardous situation that, if not avoided, could result in
death or serious injury.

CAUTION

•

CAUTION indicates a potentially hazardous situation that, if not avoided, could result in
minor or moderate injury.

ATTENTION

•

NOTICE indicates a harmful situation that could result in damage to the product or some-
thing around it.

Part A: General Information

Summary of Contents for Dali





































































































































Search results

Summary of Contents for Dali

Reviews:

Related manuals for Dali

Brands by name

Popular brands

burmeier Dali, Instruction Manual

Search results

Summary of Contents for Dali

Reviews:

Related manuals for Dali

Brands by name

Popular brands