burmeier Dali, Instruction Manual

Page: 95 / 132

2 Safety Information
2.1 Safety Information for Operating the Bed
2.1.1 Electrical Cables and Connections
WARNING
Danger of electric shock
Damaged mains cables and/or power packs pose a potentially lethal hazard due to electric
shock. Take the following measures to prevent hazards due to electric shock and malfunc-
tions.
•
If a damaged mains cable and/or power pack continues to be used, this can result in elec-
tric shock, fire and other hazards as well as malfunctions. A damaged mains cable and/or
power pack must be replaced immediately!
•
Connect the bed only to a correctly installed electrical sockets.
•
Route the mains cable and also all other cables from secondary devices in such a way
that they cannot be pulled, driven over, damaged by moving parts, crushed or damaged in
any other way when the bed is operated.
•
Before moving the bed, always make sure that you have unplugged it from the mains
socket.
•
Hang the mains cable and/or power pack in the mains cable holder provided on the chas-
sis headboard to ensure that it will not fall off or trail on the floor.
•
At at least weekly intervals when the bed is being used, carry out a visual inspection of
the mains cable and/or power pack to check for damage (scuffing, exposed wires, kinks,
pressure points, etc.). A check should also be performed whenever the cable has been
subjected to any mechanical load, e.g. has been run over by the bed itself or by an equip-
ment trolley, or whenever the cable has been bent, stretched or violently pulled, e.g. due
to the bed rolling away while it is still plugged into the mains socket, and before plugging
the cable back into the mains socket whenever the bed has been moved or relocated.
•
Check the strain relief for the mains cable regularly to ensure that the screws are tight.
Part C: Care staff and residents 3