manualshive.com logo in svg

Bunn ingle Multi- BrewWISEDBC WITH SMART FUNNELTM, Installation And Operating Manual, Page: 29 / 50

Share
Download
Bunn ingle Multi- BrewWISEDBC WITH SMART FUNNELTM Installation And Operating Manual Download Page 29

Page 29

DRIP TIME

This function allows the setting of a period of time

at the end of a brew cycle to ensure that liquid has
emptied out of the funnel prior to returning to 

READY

TO BREW

.

Procedure to modify drip times:

Range: 

OFF to 10 minutes for all batch sizes.

NOTE: 

If the brewer is already in the 

DRIP TIMES

screen, it is not necessary to follow steps 1 through 10
in this section, but proceed directly to step 11.

1. Press and hold the ® pad until the display reads

WARMER OFF. 

Release the ® pad. Press the ®

until the display reads 

REVIEW RECIPES

.

2. Press 

YES

 to proceed. The display should now

read 

NO NAME, 

along with

 MODIFY 

and

 NEXT.

3. Press and release 

NEXT

 to advance to the desired

coffee name to be modified.

4. Press and release 

MODIFY. 

The display should

read 

BREW MI/M.

5. Press and release 

DONE

. The display should read

BATCHES DONE?

.

6. Press and release 

YES

. The display should now

read 

% DILUTION.

7. Press and release 

DONE

. The display should read

BATCHES DONE?

.

8. Press and release 

YES. 

The display should now

read 

SET PULSE BREW.

9. Press and release 

NO. 

The display should now

read 

SET PREINFUSION.

10. Press and release 

NO. 

The display should now

read 

DRIP TIME, 

along with either the word 

OFF

,

or a time will be showing. A batch light should also
be blinking.

11. Using the 

(-)

 and 

(+)

, set the amount of time from

when the brew solenoid shuts off to when drip-out
occurs for that batch size.

NOTE:

 Set to 

OFF

 to disable this function. To set to

OFF, 

press and release 

(-) 

until 

OFF 

is displayed.

P3220

PROGRAMMING FUNCTIONS - LEVEL 2 (cont.)

REVIEW RECIPES?

NO                     YES

BATCHES DONE?

NO                     YES

DRIP TIME  X:XX

(-)        DONE        (+)

NO-NAME

MODIFY         NEXT

EXIT TO

NEXT

FUNCTION

SCREEN

ADVANCES TO ALL OTHER

RECIPE NAMES PROGRAMMED

IN THE BREWER'S MEMORY

WHEN THE LAST RECIPE NAME

IN THE BREWER'S MEMORY IS

DISPLAYED, PRESSING 

NEXT

WILL EXIT AND THE DISPLAY

WILL THEN READ:

EXITS TO THE NEXT RECIPE NAME

IN THE BREWER'S MEMORY. IF NO

OTHER RECIPE NAMES ARE

ENTERED IN THE BREWER'S

MEMORY, THE DISPLAY WILL READ:

(RECIPE NAME)

MODIFY         NEXT

(RECIPE NAME)

SETUP COMPLETE

THAT WAS THE

LAST RECIPE

PRESS

DONE

YES

DONE

YES

NO
NO

SCREEN DISPLAYED
BREW OZ: XX.XX
BATCHES DONE?
% DILUTION XX.X
BATCHES DONE?
SET PULSE BREW?
SET PREINFUSION?

12. When finished, press another batch size and re-

peat step 11 until all batches are set.

13. When finished, press 

DONE

. The display should

read 

BATCHES DONE

?

14. If all batch sizes are set correctly, press 

YES

. The

screen should show the name of the coffee flavor
being programmed (modified) along with 

SETUP

COMPLETE

.

15. After a 5 second delay, the display will advance to

the next coffee name in the brewer's memory. If no
other coffee names are present, the display will
read 

THAT WAS THE LAST RECIPE

, and return to

the 

REVIEW RECIPES

 screen.

37467  110904

Summary of Contents for ingle Multi- BrewWISEDBC WITH SMART FUNNELTM



















































Reviews:

No comments