Page 22
BREW MI: (SETTING OR ADJUSTING BREW VOL-
UMES)
This function allows adjustment of the brew vol-
umes for each batch. The indicator signifies volume in
ounces per batch.
Procedure for modifying recipes - brew ounces:
Range: 100.0 ml to 8000 ml for all batch sizes
1. Press and hold the ® pad until the display reads
WARMER OFF.
Release the ® pad. Press the ®
until the display reads
REVIEW RECIPES
.
2. Press
YES
to proceed. The display should now
read
NO NAME,
along with
MODIFY
and
NEXT.
3. Press and release
NEXT
to advance to the desired
coffee name to be modified.
4. Press and release
MODIFY.
The display should
read
BREW OZ
and a batch light will be blinking.
Press and release the batch size to be modified.
REVIEW RECIPES?
NO YES
BATCHES DONE?
NO YES
BREW MI/M XX.X
(-) DONE (+)
% DILUTION XX
(-) DONE (+)
NO-NAME
MODIFY NEXT
(RECIPE NAME)
MODIFY NEXT
THAT WAS THE
LAST RECIPE
EXIT TO
NEXT FUNCTION
SCREEN
ADVANCES TO ALL OTHER
RECIPE NAMES PROGRAMMED
IN THE BREWER'S MEMORY
WHEN THE LAST RECIPE NAME
IN THE BREWER'S MEMORY IS
DISPLAYED, PRESSING
NEXT
WILL EXIT AND THE DISPLAY
WILL THEN READ:
SEE
MODIFYING
DILUTION PERCENTAGES
ON THE FOLLOWING PAGE
OR PRESS AND RELEASE
ON/OFF PAD TO EXIT THE
BREW MI/M: SETUP AND
RETURN TO THE MAIN SCREEN
P3213
PROGRAMMING FUNCTIONS - LEVEL 2 (cont.)
5. Using
(-)
and
(+)
, set the amount of brew water, in
ounces, to be dispensed
over
the grounds/tea for
that particular batch size.
6. When finished, press another batch size and re-
peat step #5 for that size for each batch size to be
modified. Continue setting all batch sizes.
7. When finished setting all batch sizes, press and
release
DONE
. The display should read
BATCH
SIZES DONE?
8. If all batch sizes are not correct, press and release
NO
to return to the
BREW MI/M
setup screen and
repeat steps 5, 6 and 7.
9. If all batch sizes are correct, press
YES
. This will
advance to the
% DILUTION
function. Another
alternative is to press the "ON/OFF/LOWER" pad to
exit the
BREW MI/M
setup and return to the
MAIN
SCREEN.
37467 110904
