Page 28
PROGRAMMING FUNCTIONS - LEVEL 2 (cont.)
SET PREINFUSION
This function allows the operator to set an initial
soaking of the grounds/tea and a delay time, before
the complete brew cycle starts.
Procedure for Modifying preinfusion times:
Range: On time
- off to 4 minutes
Off time
- off to 4 minutes for all batch sizes
NOTE:
If the brewer is already in the
SET PREINFUSION
screen, it is not necessary to follow steps 1 through 9
in this section, but proceed directly to step 10.
1. Press and hold the ® pad until the display reads
WARMER OFF.
Release the ® pad. Press the ®
until the display reads
REVIEW RECIPES
.
2. Press
YES
to proceed. The display should now
read
NO NAME,
along with
MODIFY
and
NEXT.
3. Press and release
NEXT
to advance to the desired
coffee name to be modified.
4. Press and release
MODIFY.
The display should
read
BREW MI/M.
5. Press and release
DONE
. The display should read
BATCHES DONE?
.
6. Press and release
YES
. The display should now
read
% DILUTION.
7. Press and release
DONE
. The display should read
BATCHES DONE?
.
8. Press and release
YES.
The display should now
read
SET PULSE BREW.
9. Press and release
NO.
The display should now
read
SET PREINFUSION.
10. Press
YES
to proceed. The display should now
read
ON TIME
and a batch light will be blinking.
11. Using
(-)
and
(+)
, set the amount of time the brew
water will initially
presoak
the grounds for that
particular batch size.
12. When finished, press another batch size and re-
peat until all three batch sizes are set.
13. When finished, press
DONE.
The display should
now read
OFF TIME
and a batch light will be
blinking.
14. Using
(-)
and
(+)
, set the amount of time the brew
cycle will delay (after the presoak cycle shuts off)
before resuming brewing.
15. When finished, press another batch size and re-
peat until all three batch sizes are set.
16. When finished, press
DONE.
The display will show
the
ON
and
OFF TIMES
that were entered for a
particular batch size.
17. After a 5 second delay, the display should read
BATCHES DONE?.
If all batches are not complete,
press
NO
in order to return to
SET PREINFUSION
,
and repeat steps 10 through 14.
18. If all batches are done, press
YES
. This will
advance to the next function,
SET DRIP TIME.
Another alternative is to press the "ON/OFF/LOWER"
pad located on the front panel of the brewer to exit
SET PULSE BREW
and return to the
MAIN SCREEN
.
REVIEW RECIPES?
NO YES
SET PREINFUSION?
NO YES
BATCHES DONE?
NO YES
ON OFF
X:XX X:XX
OFF TIME X:XX
(-) DONE (+)
DRIP TIME X:XX
(-) DONE (+)
ON TIME X:XX
(-) DONE (+)
(RECIPE NAME)
MODIFY NEXT
THAT WAS THE
LAST RECIPE
NO-NAME
MODIFY NEXT
EXIT TO
NEXT FUNCTION
SCREEN
ADVANCES
TO NEXT
SCREEN
5 SEC. DELAY
PRESS
DONE
YES
DONE
YES
NO
SCREEN DISPLAYED
BREW OZ: XX.XX
BATCHES DONE?
% DILUTION XX.X
BATCHES DONE?
SET PULSE BREW?
ADVANCES TO ALL OTHER
RECIPE NAMES PROGRAMMED
IN THE BREWER'S MEMORY
WHEN THE LAST RECIPE NAME
IN THE BREWER'S MEMORY IS
DISPLAYED, PRESSING
NEXT
WILL EXIT AND THE DISPLAY
WILL THEN READ:
SEE
MODIFYING
DRIP TIMES, PAGE 25
P3219
37467 110904