Page 20
PROGRAMMING FUNCTIONS - LEVEL 2 (cont.)
SET NEW RECIPE - METHOD 3
If not using a Smart Funnel (with a sensor coil) and/
or a Single Multi-BrewWISE DBC Grinder, the brewer
will function as a standard BUNN
Single Multi-
BrewWISE DBC Brewer:
It is possible to operate the brewer without using
a Smart Funnel and/or a DBC Grinder. If a standard
funnel, or if a non-DBC grinder is used the brewer will
automatically select a
NO NAME
coffee flavor when the
"BREW" pad is pressed. This means that no name was
read from the funnel's handle.
There is a
NO NAME
coffee program that can be set
in the brewer. This includes
BREW VOLUMES, DILU-
TION PERCENTAGES, PULSE BREW TIMES,
PREINFUSION TIMES
and
DRIP-OUT TIMES
. The
brewer will perform in the same capacity as a standard
BUNN Single Multi-BrewWISE DBC Brewer.
The instructions for programming the
NO NAME
settings are on the following pages. The same steps
are followed for setting the recipe as those that are
used to
MODIFY A RECIPE
, beginning on page 21.
Note that when the display reads
NO NAME
, that is
when
MODIFY
should be pressed in order to set the
parameters for the
NO NAME
coffee.
NOTE:
Before beginning setup, insert a funnel into the
funnel rails, and place a server beneath the brew
funnel.
REVIEW RECIPES?
NO YES
(RECIPE NAME)
MODIFY NEXT
BREW MI/M. XX.X
(-) DONE (+)
BREW MI/M. XX.X
(-) DONE (+)
NO-NAME
MODIFY NEXT
EXIT TO
NEXT FUNCTION
SCREEN
P3211
37467 110904