Page 21
Ejector Assembly:
Removal and Replacement:
AutoPod & MyCafé-AP
1. Unplug brewer.
2. Remove drip tray and bin assemblies.
3. Remove top cover and rear panel.
4. Pull out on bottom of door bezel. Slide bezel up
and off of door. FIG 20-1.
5. Remove 2 clamps and hoses from sprayhead as-
sembly.
6. Remove vent valve hose from back of ejector.
7. Disconnect harnesses from index motor, sensor
and display board.
8. Remove 5 screws from housing. FIG 20-2.
9. Spread back of housing to clear bracket assem-
bly and slide housing towards front to separate
from chassis. FIG 20-3.
10. Remove 3 screws from rear mounting bracket.
FIG 20-4.
11. Seperate ejector from chassis. FIG 5.
INDEX MOTOR & SENSOR
FIG 20-1 Remove bezel
FIG 20-2 Remove 5 screws
CONTINUED
FIG 20-4 Remove 3 screws
FIG 20-3 Spread back of housing.
FIG 20-5 Separate ejector from chassis
41169 061812
