Example:
K:\EBULL\ CALDATA\U0200001.EPC
where :
К - Device label (USB flash pen drive )
EBULL - Ebulliometer folder
CALDATA - Folder containing calibration files
U0200001.EPC - Pressure calibration recovery file for Ebulliometer serial number U0200001
Note: The EBULL and CALDATA folders on the USB flash-pen drive must be created by the user.
Before starting the "Pressure calibration restore" procedure, the user must plug in the USB flash-drive drive
of one of the four USB connectors located on the back panel of the device.
To start the " Pressure calibration restore" procedure, from the "File management" menu (see item 5.4.7.),
select the " Pressure calibration restore" menu option using the <Down arrow> / <Up arrow> buttons and
then confirm with the < OK>.
Upon successful completion of the recovery procedure, a message will appear :
5.4.7.6. Serial number restore
During the producing the producer store serial unique number in the non-volatile memory of the device, as
well as in the factory database. The same serial number is printed on a label on the back panel of the device.
In case of damage of the serial number stored in the device by some reason, the user may request the
manufacturer to obtain a data file to restore the serial number.
After receiving the file, the user must copy this file to a USB flash-pen drive in the CALDATA folder.
Example:
K:\EBULL\CALDATA\U0200001. ESN
where :
К - Device label (USB flash pen drive )
EBULL - Ebulliometer folder
CALDATA - Folder containing calibration files
U0200001. ESN - Serial number recovery file for Ebulliometer serial number U0200001
(printed on a label on the back panel).
Note: If the EBULL or CALDATA folder does not exist on the USB flash-pen drive, they must be created
by the user.
Before starting the "Serial number restore" procedure, the user must connect the USB flash-pen drive and
USB keyboard to the USB connectors located on the back panel of the device.
To start the " Serial number restore " procedure, from the "File management" menu (see item 5.4.7.), select
the " Serial number restore " menu option using the <Down arrow> / <Up arrow> buttons and then confirm
