To return to the "Settings" Menu, press the <MODE> button. To return to the "Home screen", press the
<HOME> button.
5.4.7.1. Data collection upload
After each measurement, the results are automatically saved (added) to the current daily file of the
SD card built into the device. The current daily file is created at the beginning of each day after the
first measurement. If the procedure "Data collection upload" is executed, which includes the current
day, then a new current daily file is created and the next measurements are saved (added) in it. The
aim is not to duplicate measurement data in more than one file, in case the procedure "Data
collection upload" is executed more than once a day. In this case, the measurements for one day will
be saved in several files. Therefore, if you want to collect all the measurements for one day in one
file, you need to open and collect the data from all the files with
names corresponding to the
respective day
.
The names of the data collection files are as follows:
YYMMDDHM.CSV
where :
YY
- The year of the last measurement contained in the file.
MM
- The month of the last measurement contained in the file.
DD
- The date of the last measurement contained in the file.
H
- The hour (encoded) of the last measurement contained in the file.
M
- The minute divided by two (encoded) of the last measurement contained in the file.
Table describing the
Hour
encoding in the names of the data collection files:
H
Hour
0
0
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
9
A
10
B
11
C
12
D
13
E
14
F
15
J
16
H
17
I
18