manualshive.com logo in svg

Bulls Lacuba EVO 45 Sport, Original Operating Instructions, Page: 76 / 133

Share
Download
Bulls Lacuba EVO 45 Sport Original Operating Instructions Download Page 76

Operation

MY19B103_1.0_04.01.2019

76

7.6

Electric drive system

7.6.1

Switching on the drive system

A sufficiently charged battery has been inserted into 
the vehicle.

The battery is firmly positioned. The key has been 
removed.

Press the 

On-Off button (battery)

.

If the drive system is switched on, the drive is 
activated as soon as the pedals are moved with 
sufficient force.

7.6.2

Activating the standby mode

If the vehicle is not moved, the display unit and motor 
will switch to standby mode. This can also be activated 
manually. As soon as you move the vehicle again, the 
display and motor are re-activated and the electric 
drive system is available once more. After two hours in 
standby, the battery will switch to deep sleep mode.

If you wish to switch your e-bike off for a short time, 
you can switch it to standby as follows: 

Briefly press the 

On-Off button (operating 

element)

.

The battery remains in standby mode for 2 hours.

Crash caused by lack of readiness for braking

When it is switched on, the drive system can be 
activated by the application of force on the pedals. 
There is a risk of a crash if the drive is activated 
unintentionally, and the brake is not reached.

Never start the electric drive system, or switch it off 
immediately, if the brake cannot be reached safely 
and reliably.

CAUTION

!

EN_MY19B103_1.0_BULLS Brose Lacuba Evo 45 Sport MY19_Inhalt.book  Page 76  Tuesday, January 8, 2019  4:38 PM

Summary of Contents for Lacuba EVO 45 Sport






































































































































Reviews:

No comments