MY19B103_1.0_04.01.2019
101
Maintenance
8.2.5
Checking the brake linings for wear
Check brake linings after brake has been fully applied
1,000 times.
Check that the brake lining is no less than 1.8 mm
wide at any point and no less than 2.5 mm between
the brake lining and supporting plate.
Push brake lever and hold. In doing so, check the
transport safety wear gauge can fit between the
brake lining supporting plates.
The brake linings have not reached their wear limit.
If they had, a specialist dealer would need to
replace them.
8.2.6
Checking the pressure point
Push brake lever and hold several times.
If you are unable to clearly detect the pressure
point and it changes, a specialist dealer needs to
vent the brake.
8.2.7
Checking the brake discs for wear
Check that the brake disc is no less than 1.8 mm at
any point.
The brake discs have not reached the wear limit. If
they had, a specialist dealer would need to replace
them.
8.2.8
Electrical cables and brake cables
Check all visible electrical cables and cables for
damage. If, for example, the sheathing is
compressed, the vehicle will need to be removed
from service until the cables have been replaced.
Check all electrical cables and cables to make sure
they are fully functional.
EN_MY19B103_1.0_BULLS Brose Lacuba Evo 45 Sport MY19_Inhalt.book Page 101 Tuesday, January 8, 2019 4:38 PM