manualshive.com logo in svg

Bulls Lacuba EVO 45 Sport, Original Operating Instructions, Page: 58 / 133

Share
Download
Bulls Lacuba EVO 45 Sport Original Operating Instructions Download Page 58

Before the first ride

MY19B103_1.0_04.01.2019

58

Figure 18:

Open (2) and closed (1) clamping lever on the stem; by.schulz 
speedlifter used as an example

6.2.2

T

urning the handlebars to the side

Alternative

Open the clamping lever. 

Pull the locking lever on the stem up, and 
simultaneously pivot the handlebars into the 
desired position.

You feel the locking lever click into place.

Pull out the handlebars to the required height. 

Lock the quick release.

1

2

Crash caused by incorrectly set clamping force

Excessively high clamping force will damage the quick 
release and cause it to lose its function.

Insufficient clamping force will cause a detrimental 
transmission of force. This will cause a crash with 
injuries.

Never fasten a quick release using a tool (e.g. 
hammer or pliers).

Only use the clamping lever with the specified set 
clamping force.

CAUTION

!

EN_MY19B103_1.0_BULLS Brose Lacuba Evo 45 Sport MY19_Inhalt.book  Page 58  Tuesday, January 8, 2019  4:38 PM

Summary of Contents for Lacuba EVO 45 Sport






































































































































Reviews:

No comments