manualshive.com logo in svg

Bulls Lacuba EVO 45 Sport, Original Operating Instructions, Page: 114 / 133

Share
Download
Bulls Lacuba EVO 45 Sport Original Operating Instructions Download Page 114

Transportation, storage and assembly

MY19B103_1.0_04.01.2019

114

8.4.3

Brake

Injury due to damaged brakes

Special tools and specialist knowledge are required to 
repair the brakes. Incorrect or unauthorised assembly 
can damage the brakes. This may lead to an accident 
with injuries.

Only specialist dealers may carry out repairs on 
brakes.

Never carry out work or changes (such as 
dismantling, sanding or painting) which are not 
explicitly allowed and described in the brake user 
manual. 

Hazard for the environment due to toxic 
substances

The brake system contains toxic and environmentally 
harmful oils and lubricants. These will contaminate if they 
enter the sewers or groundwater.

Dispose of lubricants and oils left over after repairs 
in an environmentally responsible way

in accordance with statutory regulations.

WARNING

!

CAUTION

!

Special tools, special lubricants and knowledge of 
suspension components are required to maintain and 
repair brake discs, such as venting brakes or replacing 
the brake discs. The brakes may become damaged if 
procedures are not followed as described. Only 
specialist dealers may carry out maintenance on 
brakes. You will find the maintenance and repair 
instructions at:

https://www.bulls-bikes.com/service/downloads.html

EN_MY19B103_1.0_BULLS Brose Lacuba Evo 45 Sport MY19_Inhalt.book  Page 114  Tuesday, January 8, 2019  4:38 PM

Summary of Contents for Lacuba EVO 45 Sport






































































































































Reviews:

No comments