Bull Novascale R410E1 User Manual Download Page 18

Page: 18 / 324

User Guide

www.bull.com

System Features

This system is a highly flexible and reliable server designed to offer the highest levels
of performance for the price range.

Its main features are:

■

The Intel® 3210 chipset.

■

The Intel® processor, either an Intel

Pentium

dual-core processor, a Dual-Core

Intel

Xeon

processor, or a Quad-Core Intel

Xeon

processor.

■

The RAID technology, offering support for various RAID levels on Microsoft®
Windows® and Linux operating systems.

■

Depending on your configuration:

- A tower chassis that can also easily be installed into a standard EIA 19-inch

rack cabinet (NovaScale T810 E1, NovaScale T830 E1).

- A rack chassis ( NovaScale R410 E1).

To get comfortable with your computer, we recommend you read this user guide. Keep
it in a safe place for future reference.

Summary of Contents for Novascale R410E1





































































































































































































































































































































Search results

Summary of Contents for Novascale R410E1

Reviews:

Related manuals for Novascale R410E1

Brands by name

Popular brands

Bull Novascale R410E1, User Manual

Search results

Summary of Contents for Novascale R410E1

Reviews:

Related manuals for Novascale R410E1

Brands by name

Popular brands