Bull Novascale R410E1, User Manual

Page: 247 / 324

User Guide
247
www.bull.com
Reinstallation to Multiple Logical drives
This section describes the procedure for reinstalling the operating system if the
multiple logical drives exist.
Before Re-installing the Operating System
Be sure to make backup copies before re-installing the operating system just in case.
Re-installing the Operating System
1. Start the clean installation following the procedure described in this guide.
2. Specify the partition in which you want to install the operating system when
the following message appears:
3. Continue the clean installation following the procedure described earlier in this
chapter.
* The drive letter of the re-installed system may differ from the one of the
previous system. If you need to modify the drive letter, follow the procedure in
"Modifying the Drive Letter".
Modifying the Drive Letter
Be aware that the drive letter of the system or boot volume cannot be modified using
the following procedure.
1. Click the Start menu, right-click My Computer , and specify Manage to start
Computer Management .
2. Specify the Disk Management in the left side of the window.
3. Right-click the volume you want to modify the drive letter and specify the
Change Drive Letter and Path... .
4. Click Yes .
5. Choose Assign a drive letter and specify the drive letter you want to assign.
6. Click OK .
7. If the following message appears, click Yes :
8. Close the Computer Management window.
The following list shows the existing partitions and unpartitioned space on this
computer.
Use the UP and DOWN ARROW keys to select an item in the list.
* Cannot modify the drive letter of your system or boot volume. Confirm the
proper drive letter is assigned and then, continue the setup.
Changing the drive letter of a volume may cause programs to no longer run.
Are you sure you want to change this drive letter?