23.
Does the list of all partitions you recorded in step 11 on page 192 contain more than one entry?
v
Yes:
Continue with the next step.
v
No:
Go to step 30.
24.
Is the error class recorded in step 23?
v
Yes:
Continue with the next step.
v
No:
Go to step 30.
25.
Perform the following steps for each entry in the list of all partitions you recorded in step 11 on page
192, except the partition you were using to debug the original problem.
26.
From the IVM virtual terminal window of a partition in the list of all partitions, type
diag
at the AIX
command prompt.
27.
When the diagnostic operating instructions are displayed, do the following steps:
1.
Press Enter.
2.
Select the
Task Selection
option.
3.
Select the
Log Repair
option.
4.
Select the resource associated with the repair action. If the repair
action was reseating a cable or adapter, select the resource
associated with that repair action. If the resource associated with
your repair action is not displayed on the Resource List, select
sysplanar0
.
5.
Click
Commit
after you have made your selection.
Note:
If the terminal type is not defined, you
are prompted to define it before you can
proceed.
28.
Exit from diagnostics in this partition and return to the AIX prompt.
29.
Have all the partitions in the list of all partitions you recorded in step 11 on page 192 been
processed?
v
Yes:
Continue with the next step.
v
No:
Go to step 25 to process the next partition in the list you recorded in step 11 on page 192.
30.
Have all the serviceable events recorded in step 4 on page 192 been processed?
v
Yes:
Continue with the next step.
v
No:
Go to step 5 on page 192 and process the next service action event in the list of serviceable events recorded in
step 4 on page 192.
194
Power Systems: IBM Power 550 Express (8204-E8A and 9409-M50) removal and replacement procedures