Bull ESCALA PL860T/R, Removal And Replacement Procedures, Page: 157 / 218

6. Remove the system processor assembly
1. Move the top of the system processor
assembly handles
(A) in the direction
shown to release the handles.
2. Rotate the system processor assembly
handles to the open position
(B) .
3. Pull the system processor assembly (C) out
by the handles.
4. Place the system processor assembly on an
electrostatic discharge (ESD) surface.
7. Remove all memory DIMMs
1. Remove the memory DIMM by pushing
the tabs
(A) out and then down. The tabs’
lever action forces the memory DIMM out
of the connector.
2. Pull the memory DIMM (B) out of the
connector.
3.
Repeat these steps until all memory
DIMMs have been removed from the
processor assembly being replaced.
Chapter 1. Removing and replacing FRUs
149