66.
Restore service processor settings
1.
Reset any service processor settings that you may have set using operating system commands. You recorded these
settings at the beginning of this procedure.
2.
If you choose to reset the HMC access password, do the following:
3.
a.
From the HMC GUI (preferred method):
b.
v
Expand the
Systems Management
folder in the navigation tree pane.
v
Expand the
Servers
folder.
v
Select the server to be powered off. A list of server-related tasks will display in the
Tasks
pane.
v
Expand the
Configuration
folder in the
Tasks
pane.
v
Under the
Configuration
folder, click the
Update Managed System Password
task.
c.
Or, from the HMC command line, type:
d.
chsyspwd -m managed system -t access --passwd --newpasswd newpassword
where:
v
The value for managed system is the new service processor’s managed system name.
v
No value for --passwd is entered thereby allowing authentication.
v
The value for newpassword is the new password value.
67.
Recover partition data on the FSP
Profile data stored in the managed server has been cleared or corrupted.
To recover profile data using the HMC, do the following:
1.
Expand the
Systems Management
folder in the navigation tree pane.
2.
Double click on the
Servers
folder.
3.
Use the checkbox to select a server.
4.
Click on the
Tasks
drop-down menu that appears on the table toolbar.
5.
From the menu, select
Recover Partition Data
.
Chapter 1. Removing and replacing FRUs
145