31.
Install the middle divider
1.
Align the middle system divider
(A)
in
between the front and rear processor
supports.
2.
Slide the middle system divider down and
into place.
3.
Insert and tighten the screw
(B)
to secure
the middle system divider.
32.
Install the PCI adapter dividers
1.
Carefully grasp the PCI adapter divider by
its top edge and align the back edge of the
divider with the retention notches
(A)
in
the system chassis.
2.
Insert the front edge of the divider
(B)
into
the slots and then press the divider into
place.
3.
Repeat these steps for the other PCI
adapter dividers that need to be installed.
132
Power Systems: IBM Power 550 Express (8204-E8A and 9409-M50) removal and replacement procedures