Yes:
Use the display hardware configuration service function to check for any missing or failed
hardware:
- On the command line, enter the
STRSST
(Start System Service Tools command). If you cannot get
to SST, select DST. Do not IPL the system or partition to get to DST.
- On the Start Service Tools Sign On display, enter the user ID with the service authority and
password.
- Select
Start a service tool
→
Hardware service manager
→
Logical hardware resources
→
System
bus resources
.
- Select the function key for
Include nonreporting resources
.
- If the IOP and IOA that you just replaced is a failed or non-reporting resource, the problem has
not been fixed. Continue to the next failing item in the failing item list.
This ends the procedure.
No:
Perform the verification procedures in the Service functions topics to verify that the problem
is corrected. Resources that usually vary on automatically during an IPL, or that were previously
varied on manually, might need to be varied on again after the verification procedures are
complete. Return the system to the customer and have the customer verify the system date and
time.
This ends the procedure.
Chapter 2. Verifying a repair
185