Bull DPS7000/XTANOVASCALE 7000 180Rb 7, Service Manual

Page: 36 / 258

1-18 System Overview
Locked Power and Reset Switches
The power and reset push-button switches on the front panel are locked when the server
is in secure mode. To exit from the secure mode, you must enter your user password.
Diskette Write Protect
If Diskette Write Protect is enabled in Setup, it write-protects the diskette drive only
while the server is in the secure mode. To exit secure mode, enter your user password.
Video Blanking
If Video Blanking is enabled in Setup, the video display will be off when the server is
in secure mode. To exit secure mode, enter your user password.
Reconfiguration
If a CPU or a memory DIMM board error was detected during execution of POST
(Power On Self-Test) after system power is turned on, the reconfiguration function
isolates the failed CPU or memory DIMM board and continues operation. You should
replace the failed device as soon as possible.
This function is enabled only when the following system requirements are met:
!
Two or more CPUs are installed.
!
Eight memory DIMM boards are installed.
A CPU or memory DIMM board error may be viewed on the screen while POST is
running or by entering BIOS Setup. It may also be viewed when the ESMPRO Suite
program is installed and operating.