Bull 296/C3, Manual, Page: 21 / 123

Procedure List
Part Procedure Location
Adapters “PCI Adapters” on page 17
Adapter Dividers and Light Pipes “PCI Adapter Dividers and Light Pipes” on page 33
Battery “Battery” on page 39
Bezels “Bezels” on page 15
Bezel Door “Bezel Door (296/E3)” on page 14
Cable-Management Arm “296/C3 Cable-Management Arm” on page 11
Covers “Covers” on page 12
Disk Drives “Hot-Swap Disk Drives” on page 53
Disk Drive Bezels and Fillers “Disk Drive Bezels and Fillers” on page 51
Display* See note
Drawer Release Latch Brackets “Drawer Release Latch Bracket (296/C3)” on page 10
Fans “Hot-Swap System Fans” on page 40
Fan Tray “Fan Tray Assembly” on page 42
Keyboard* See note
Media Devices “Media Devices” on page 46
Media Bay Chassis “Media Bay Chassis” on page 59
Mouse* See note
Operating Position “Returning the 296/C3 to the Operating Position” on page 7
“Placing the 296/E3 into the Service and Operating Position” on page 7
Operator Panel Power Cable “Operator Panel Power Cable” on page 61
Power Supply “Power Supply” on page 63
Service Position “Placing the 296/C3 into the Service Position” on page 6
“Placing the 296/E3 into the Service and Operating Position” on page 7
Service Processor Assembly “Service Processor Assembly” on page 36
Note: For the removal, replacement, and installation instructions for the items marked with an asterisk,
see the documentation provided by the product manufacturer.
Chapter 2. Removal, Replacement, and Installation Procedures
5