Bull 296/C3, Manual, Page: 51 / 123

Removing the PCI-Adapter-Divider Light Pipes
To remove a PCI-adapter-divider light pipe, do the following:
1. Remove the PCI adapter divider as described in “Removing a PCI Adapter Divider” on page 33.
2. Locate the light pipe you want to remove and note the location.
3. Pull the light pipe out of the PCI adapter divider.
1
2
1 PCI Adapter (Long) 2 Light Pipe
Replacing the PCI-Adapter-Divider Light Pipes
To replace an PCI-adapter-divider light pipe, do the following:
1. Locate the light-pipe slot in the PCI adapter divider you want to use.
2. Place the light pipe into the slot, and press it into place.
3. Replace the PCI adapter divider as described in “Replacing a PCI Adapter Divider” on page 34.
Chapter 2. Removal, Replacement, and Installation Procedures
35