Buick Century Owner'S Manual Download Page 258

Page: 258 / 358

7. Do not let the other

end touch metal.
Connect it to the
positive (+) terminal
of the good battery.
Use a remote
positive (+) terminal
if the vehicle has one.

8. Now connect the

negative (

−

) cable to

the negative (

−

)

terminal of the good
battery. Use a remote
negative (

−

) terminal

if the vehicle has one.

Do not let the other end touch anything until the
next step. The other end of the negative (

−

) cable

does not go to the dead battery. It goes to a
heavy, unpainted metal part, or to the remote
negative (

−

) terminal on the vehicle with the dead

battery.

5-46

Summary of Contents for Century







































































































































































































































































































































































Search results

Summary of Contents for Century

Reviews:

Related manuals for Century

Brands by name

Popular brands

Buick Century, Owner'S Manual

Search results

Summary of Contents for Century

Reviews:

Related manuals for Century

Brands by name

Popular brands