Buick Century Owner'S Manual Download Page 340 | Manualshive

Page: 340 / 358

background image

Public Transportation or Fuel
Reimbursement

If your vehicle requires overnight warranty repairs,
reimbursement (five days maximum) may be available
for the use of public transportation such a s taxi or
bus. In addition, should you arrange transportation
through a friend or relative, reimbursement for
reasonable fuel expenses (five day maximum) may be
available. Claim amounts should reflect actual costs and
be supported by original receipts.

Courtesy Rental Vehicle

Your dealer may arrange to provide you with a courtesy
rental vehicle or reimburse you for a rental vehicle
you obtained if your vehicle is kept for a warranty repair.
Reimbursement will be limited to a maximum of $30 a
day and must be supported by receipts. This requires
that you sign and complete a rental agreement and meet
state, local and rental vehicle provider requirements.
Requirements vary and may include minimum age
requirements, insurance coverage, credit card, etc. You
are responsible for taxes, levies, usage fees, excessive
mileage or rental usage beyond the completion of
the repair.

Generally it is not possible to provide a like-vehicle as a
courtesy rental.

Additional Program Information

Courtesy Transportation is available during the
Bumper-to-Bumper warranty coverage period, but it is
not part of the New Vehicle Limited Warranty. A
separate booklet entitled Warranty and Owner
Assistance Information furnished with each new vehicle
provides detailed warranty coverage information.

Courtesy Transportation is available only at participating
dealers and all program options, such as shuttle
service, may not be available at every dealer. Please
contact your dealer for specific information about
availability. All Courtesy Transportation arrangements
will be administered by appropriate dealer personnel.

Canadian Vehicles: For warranty repairs during
the Complete Vehicle Coverage period of the General
Motors of Canada New Vehicle Limited Warranty,
alternative transportation may be available under the
Courtesy Transportation Program. Please consult
your dealer for details.

General Motors reserves the right to unilaterally modify,
change or discontinue Courtesy Transportation at
any time and to resolve all questions of claim eligibility
pursuant to the terms and conditions described
herein at its sole discretion.

7-8

«
...
338
339
340
341
342
...
»

Summary of Contents for Century







































































































































































































































































































































































Reviews:

No comments

Related manuals for Century

Brand: iArmor Pages: 6

Brand: Mobile Create Pages: 15

Car Top Duffle Bag

Brand: Rightline Gear Pages: 2

Dunlop L.D02.C.M

Brand: Sumitomo Pages: 22

Brand: Bestop Pages: 5

Brand: PowerMadd Pages: 3

PRIME DESIGN HXR-269-E-UM3-80

Brand: Safe Fleet Pages: 12

Brand: Cadillac Pages: 335

Brand: chinavasion Pages: 3

Brand: Kargo Master Pages: 10

Brand: Navman Pages: 10

BUSHMAN 15L ROADIE fridge Base console

Brand: Cruiser Consoles Pages: 6

Brand: Chevrolet Pages: 340

Brand: Chevrolet Pages: 364

Brand: Honda Pages: 15

Brand: Honda Pages: 574

Brand: Craftsman Pages: 5

Brand: Craftsman Pages: 7

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands