manualshive.com logo in svg

Buick Century, Owner'S Manual

Looking for a comprehensive Buick Century Owner's Manual? Look no further! Download the complete manual for your Buick Century, free of charge, from manualshive.com. This user-friendly manual provides detailed instructions and useful tips to ensure you make the most of your Buick Century driving experience.

Share
Download
background image

Delayed Exit Lighting

This feature illuminates the interior for a period of time
after the ignition key is removed from the ignition.

The ignition must be off for delayed exit lighting to work.
When the ignition key is removed, interior illumination
will activate and remain on until one of the following
occurs:

•

The ignition is in RUN.

•

The power door locks are activated.

•

An illumination period of 25 seconds has elapsed.

If during the illumination period a door is opened,
the timed illumination period will be canceled and the
interior lamps will remain on.

Reading Lamps

The reading lamps are located on the underside of the
rearview mirror. Press the button next to each lamp
to turn it on and off.

Dome Lamp

The dome lamp will come on when you open a door.

Battery Rundown Protection

This helps the vehicle’s battery from draining the battery
in case the interior courtesy lamps, reading lamps,
visor vanity lamps, trunk lamp, underhood lamp or glove
box lamps are left on. If any of these lamps are left
on while the ignition is off, they will automatically turn off
after 20 minutes. The lamps will not come back on
again until you do one of the following:

•

Turn the ignition on.

•

Turn the exterior lamps control off, then on.

•

Open a door.

If the vehicle has less than 15 miles (25 km) on the
odometer, the battery saver will turn off the lamps after
only three minutes.

3-16

Summary of Contents for Century







































































































































































































































































































































































Reviews:

No comments

Related manuals for Century

Kia Picanto 2015 Quick Reference Manual preview
Picanto 2015
Brand: Kia Pages: 10
Havis-Shields 1997-2007 Dodge Dakota Telescoping Computer Base C-TCB-28 Install Instructions preview
1997-2007 Dodge Dakota Telescoping Computer Base C-TCB-28
Brand: Havis-Shields Pages: 3
muth signal mirror Instalation Instructions preview
signal mirror
Brand: muth Pages: 10
AA Products SR-A260 Instruction Manual preview
SR-A260
Brand: AA Products Pages: 4
Road Ranger H392 Installation Manual preview
H392
Brand: Road Ranger Pages: 22
T-Mobile SyncUP DRIVE Start Manual preview
SyncUP DRIVE
Brand: T-Mobile Pages: 2
Dodge 2010 Challenger SRT Owner'S Manual preview
2010 Challenger SRT
Brand: Dodge Pages: 444
true-i HMBS-200 User Manual preview
HMBS-200
Brand: true-i Pages: 11
Blue Ox BX1120 Installation Instructions preview
BX1120
Brand: Blue Ox Pages: 5
Menabo ANTARES KIT+1 Assembly & Instruction Manual preview
ANTARES KIT+1
Brand: Menabo Pages: 8
Seat Arona 2018 Owner'S Manual preview
Arona 2018
Brand: Seat Pages: 372
Rugged Ridge 13551.33 Manual preview
13551.33
Brand: Rugged Ridge Pages: 3
SpeedTech Lights STL Boss Quick Start Manual preview
STL Boss
Brand: SpeedTech Lights Pages: 2
Menabo 171071 Fitting Instructions preview
171071
Brand: Menabo Pages: 4
Baseus CRJS01 User Manual preview
CRJS01
Brand: Baseus Pages: 5
Honda 2005 Civic Owner'S Manual preview
2005 Civic
Brand: Honda Pages: 234
Bracketron MVM Multi Vehicle Mount MVM-45-05 Installation Manual preview
MVM Multi Vehicle Mount MVM-45-05
Brand: Bracketron Pages: 4
Comtronics 246559 Installation Instructions Manual preview
246559
Brand: Comtronics Pages: 18

Brands by name

Popular brands

Load more brands