Buick Century Owner'S Manual Download Page 245

Page: 245 / 358

3. After the engine cools, open the coolant air bleed

valves. There are two bleed valves.

One is located on the
thermostat housing.

The other is located on the
thermostat bypass tube.

4. Fill the radiator with the

proper DEX-COOL

coolant mixture,
up to the base of the
filler neck. See
Engine Coolant on
page 5-22 for more
information about the
proper coolant mixture.

If a stream of coolant is coming from an air bleed
valve, close the valve. Otherwise, close the
valves after the radiator is filled.

5. Rinse or wipe any spilled coolant from the engine

and the compartment.

5-33

Summary of Contents for Century







































































































































































































































































































































































Search results

Summary of Contents for Century

Reviews:

Related manuals for Century

Brands by name

Popular brands

Buick Century, Owner'S Manual

Search results

Summary of Contents for Century

Reviews:

Related manuals for Century

Brands by name

Popular brands