Buick Century Owner'S Manual Download Page 102 | Manualshive

Page: 102 / 358

background image

Sunroof

The vehicle may have a sunroof. It includes a sliding
glass panel and a sunshade.

The switch to open the sunroof is located overhead on
the headliner.

The switch works only when the ignition is on or when
Retained Accessory Power (RAP) is active. See
“Retained Accessory Power (RAP)” in Ignition Positions
on page 2-19.

VENT: To raise the sunroof to the vent position, push
and hold the front of the switch until the sunroof
glass stops. The sunshade must be opened by hand.
To close the sunroof from the vent position, push
and hold the rear of the switch until the sunroof
glass closes.

Open/Express Open: To open the sunroof, push the
rear of the switch once. The sunroof and sunshade
will open by themselves. To close the sunroof, push and
hold the front of the switch until the sunroof motor
stops. The sunshade must be closed by hand.

2-36

«
...
100
101
102
103
104
...
»

Summary of Contents for Century







































































































































































































































































































































































Reviews:

No comments

Related manuals for Century

Brand: PAC Pages: 4

2012 Truck Chassis cab

Brand: RAM Pages: 506

RVS systems RVS-M641

Brand: Safe Fleet Pages: 24

Brand: rockymounts Pages: 6

Brand: Broadfeet Pages: 2

Brand: Renault Pages: 198

Brand: Kia Pages: 233

Brand: Mercedes-Benz Pages: 585

Brand: TracRac Pages: 8

Brand: Mercedes-Benz Pages: 305

S90 TWIN ENGINE

Brand: Volvo Pages: 662

Turbocharger 15012

Brand: Edelbrock Pages: 1

Yukon XL Denali 2015

Brand: GMC Pages: 439

Bounder turbo diesel 2001

Brand: Fleetwood Pages: 166

Brand: Mercedes-Benz Pages: 24

Electronic Parking Disc 3

Brand: Jacob Jensen Pages: 17

Brand: Rola Pages: 2

Brand: Or-Fab Pages: 3

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands