Buick Century Owner'S Manual Download Page 264

Page: 264 / 358

3. Disconnect the electrical connector (B) from the

headlamp assembly.

4. Slide the headlamp assembly out of the slots.

5. Remove the rubber access cover from behind the

bulb being replaced.

6. Turn the bulb socket one-quarter turn and remove it

from the headlamp assembly.

7. Lift the plastic locking tab on the electrical connector

and pull the connector from the headlamp bulb
socket.

8. Connect the new headlamp bulb to the electrical

connector, making sure the connector tab snaps
into place.

9. Insert the bulb socket into the headlamp assembly.

10. Reverse all steps to reassemble the headlamp

assembly, then check the lamps.

Front Turn Signal and Parking
Lamps

1. Remove the headlamp assembly. Refer to the

removal procedure earlier in this section.

2. Remove the rubber bulb access cover.

3. Twist the sidemarker lamp socket, located on the

outboard side of the headlamp assembly,
counterclockwise and pull it from the headlamp
assembly.

4. Holding the base of the socket, pull the old bulb

from the socket.

5. Push the new bulb into the socket.

6. Reverse Steps 1 through 3 to reinstall the lamp

assembly.

5-52

Summary of Contents for Century







































































































































































































































































































































































Search results

Summary of Contents for Century

Reviews:

Related manuals for Century

Brands by name

Popular brands

Buick Century, Owner'S Manual

Search results

Summary of Contents for Century

Reviews:

Related manuals for Century

Brands by name

Popular brands