Buick 2007 Rainier Owner'S Manual Download Page 154

Page: 154 / 534

Hazard Warning Flashers

The hazard warning flashers warn others.
They also let police know you have a problem.
Your front and rear turn signal lamps will flash on
and off.

The hazard warning
flasher button is located
on top of the steering
column.

The hazard warning flashers work no matter what
ignition position the key is in, and even if the
key is not in the ignition.

Press the button to make the front and rear turn
signal lamps flash on and off. Press the button
again to turn the flashers off.

When the hazard warning flashers are on, your
turn signals will not work.

Other Warning Devices

If you carry reflective triangles, you can set them up
at the side of the road about 300 feet (100 m)
behind your vehicle.

Horn

Press near or on the horn symbols on your
steering wheel pad to sound the horn.

Tilt Wheel

The steering wheel should be adjusted before you
drive.

154

Summary of Contents for 2007 Rainier























































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2007 Rainier

Reviews:

Related manuals for 2007 Rainier

Brands by name

Popular brands

Buick 2007 Rainier, Owner'S Manual

Search results

Summary of Contents for 2007 Rainier

Reviews:

Related manuals for 2007 Rainier

Brands by name

Popular brands