Buick 2007 Rainier Owner'S Manual Download Page 444

Page: 444 / 534

9. Place the spare tire on the wheel-mounting

surface.

{

CAUTION:

Never use oil or grease on studs or nuts.
If you do, the nuts might come loose.
Your wheel could fall off, causing a
serious accident.

10. Put the nuts on by hand. Make sure the

rounded end is toward the wheel.

11. Tighten each nut by hand until the wheel is

held against the hub. If a nut cannot be
turned by hand, use the wheel wrench and
see your dealer as soon as possible.

12. Lower the vehicle by turning the jack handle

counterclockwise. Lower the jack completely.

444

Summary of Contents for 2007 Rainier























































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2007 Rainier

Reviews:

Related manuals for 2007 Rainier

Brands by name

Popular brands

Buick 2007 Rainier, Owner'S Manual

Search results

Summary of Contents for 2007 Rainier

Reviews:

Related manuals for 2007 Rainier

Brands by name

Popular brands