Buick 2007 Rainier Owner'S Manual Download Page 405

Page: 405 / 534

Headlamps, Front Turn Signal, and
Parking Lamps

To replace a bulb, do the following:

1. Open the hood. See

Hood Release on

page 364

for more information.

2. Remove the grille by grasping and pulling it

forward.

3. Lift the two headlamp retaining clips.

4. Pull the headlamp assembly away from the

vehicle to access the electrical connectors.

5. Remove the cover from the headlamp bulb.

6. Disconnect the wiring harness.

7. Remove the bulb socket by turning it

counterclockwise. Pull the bulb from the
socket.

8. Install the new bulb and turn clockwise to

secure it.

9. Reinstall by reversing Steps 1 through 6.

10. Press down on the headlamp retaining clips to

secure the headlamp assembly.

Taillamps and Turn Signal Lamps

To replace a taillamp or turn signal bulb, do
the following:

1. Open the liftgate. See

Liftgate/Liftglass on

page 102

for more information.

2. Remove the two

screws from the
taillamp assembly.

3. Pull the taillamp assembly away from the

vehicle.

405

Summary of Contents for 2007 Rainier























































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2007 Rainier

Reviews:

Buick 2007 Rainier, Owner'S Manual, Page: 405 / 534

Search results

Summary of Contents for 2007 Rainier

Reviews: