Buick 2007 Rainier Owner'S Manual Download Page 438

Page: 438 / 534

Removing the Spare Tire and Tools

The jacking equipment you will need is stored
under the rear seat on the passenger’s side of the
vehicle. See

Rear Seat Operation on page 16

for more information.

To release the jack from its holder, turn the
knob on the jack counterclockwise to lower the
jack head.

The tools you will be using include the wheel
wrench (A), wheel blocks (B), extension(s), (socket
end) (C), handle (jack end) (D), and jack (E).

A. Wheel Wrench

B. Hoist Shaft

C. Extension

D. Retainer

E. Spare or Flat Tire

(Valve Stem
Pointed Up)

438

Summary of Contents for 2007 Rainier























































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2007 Rainier

Reviews:

Buick 2007 Rainier, Owner'S Manual, Page: 438 / 534

Search results

Summary of Contents for 2007 Rainier

Reviews: