Home
/
Buick
/
2007 Rainier
/
Owner'S Manual

Buick 2007 Rainier, Owner'S Manual, Page: 488 / 534

Share

Page: 488 / 534

Buick 2007 Rainier Owner'S Manual Download Page 488

Parking Brake and Automatic
Transmission Park (P) Mechanism Check

{

CAUTION:

When you are doing this check, your
vehicle could begin to move. You or
others could be injured and property
could be damaged. Make sure there is
room in front of your vehicle in case it
begins to roll. Be ready to apply the
regular brake at once should the vehicle
begin to move.

Park on a fairly steep hill, with the vehicle facing
downhill. Keeping your foot on the regular
brake, set the parking brake.

•

To check the parking brake’s holding ability:
With the engine running and transmission in
NEUTRAL (N), slowly remove foot pressure
from the regular brake pedal. Do this until the
vehicle is held by the parking brake only.

•

To check the PARK (P) mechanism’s holding
ability: With the engine running, shift to
PARK (P). Then release the parking brake
followed by the regular brake.

Contact your GM Goodwrench

®

dealer if service is

required.

Underbody Flushing Service

At least every spring, use plain water to flush
any corrosive materials from the underbody.
Take care to clean thoroughly any areas where
mud and other debris can collect.

488

«
...
486
487
488
489
490
...
»

Summary of Contents for 2007 Rainier























































































































































































































































































































































































































































































































































Reviews:

No comments