Buick 2007 Rainier Owner'S Manual Download Page 188

Page: 188 / 534

StabiliTrak

Service Light

This light will come on
briefly when the engine
is started.

This light will come on if a problem is detected in
the StabiliTrak

system.

For more information see

StabiliTrak

System on

page 289

StabiliTrak

Indicator Light

This warning light
should come on briefly
when the engine is
started.

During most driving conditions, this light will not
come on. If the StabiliTrak

System is actively

controlling the stability and/or traction of the
vehicle, this light will flash. This is normal.

This light will come on if any portion of the system
has been manually turned off or a problem is
detected in the system.

If your vehicle has a Driver Information Center, a
message will appear also, see

DIC Warnings

and Messages on page 202

and

StabiliTrak

System on page 289

for more information.

188

Summary of Contents for 2007 Rainier























































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2007 Rainier

Reviews:

Related manuals for 2007 Rainier

Brands by name

Popular brands

Buick 2007 Rainier, Owner'S Manual

Search results

Summary of Contents for 2007 Rainier

Reviews:

Related manuals for 2007 Rainier

Brands by name

Popular brands