Buffalo TeraStation TS4200D, User Manual, Page: 56 / 150

56
Mutual Authentication Password Setup for Your Computer
If you are using mutual authentication by the TeraStation or by each volume, enter the same password as the one
that was set for the access restrictions for the TeraStation or for each volume in the mutual authentication password
entry screen. If there are multiple volumes, the computer connects to the volumes whose password was entered here.
The computer cannot connect to multiple volumes with different mutual authentication passwords at the same time.
To change the mutual authentication password at the computer to the mutual authentication password for another
volume, navigate to
Setup - Set Mutual CHAP Secret in the iSCSI Connection Tool menu.
Note: If different passwords are set for the mutual authentication password of the TeraStation (entire system) and
mutual authentication passwords for each volume, after the volume is connected, the volume name will no longer
be displayed in the “Volume” field of the iSCSI Connection Tool. If this happens, navigate to
Setup - Set Mutual CHAP
Secret in the iSCSI Connection Tool, enter the TeraStation’s password, and click OK .
Disconnecting and Unregistering the TeraStation
To disconnect the TeraStation, disconnect the volume and remove the registration as shown below.
1
Click Start - All Programs - BUFFALO - iSCSI Connection Tool - iSCSI Connection Tool .
For Windows 8, click the iSCSI Connection Tool .
2
Select the volume to disconnect from “Volume”, then click Disconnect .
3
Click Yes .
4
Select the TeraStation to be disconnected from “Target”, then click Unregister iSCSI Device .
Note: When connecting to the TeraStation from multiple computers, follow the above procedure to remove the