Buffalo TeraStation TS4200D, User Manual

Page: 139 / 150

139
NAS Navigator2 for Mac
NAS Navigator2 is a utility program that makes it easy to display Settings, change the TeraStation’s IP address, or check
its hard drive.
If you installed the TeraStation with the TeraNavigator CD, NAS Navigator2 was installed automatically. To launch it, click
the icon in the Dock.
Click on a TeraStation’s icon to display:
• Total capacity
• Used capacity
• Workgroup
• IP address
• Subnet mask
• Default gateway
• MAC address
• Firmware version
Double-click it to open a share on the TeraStation.
Name Description
Open Opens the default shared folder for a selected TeraStation.
Refresh Searches for NAS devices on the network again.
I’m here Causes your TeraStation to beep.
Settings Opens Settings for the selected TeraStation.
Configure
Opens a window that letsyou configure NAS’s IP address
or open Settings.
Label Color
Selects the color of the name displayed below the
icon. The menu below is displayed when you click the
TeraStation icon while holding down the control key.
View Options Lets you choose icon size, position, and view mode.
Auto Power Mode
Auto power mode can turn supported TeraStations and
LinkStations on the network on and off automatically.