manualshive.com logo in svg

Buffalo TeraStation TS4200D, User Manual, Page: 11 / 150

Share
Download
Buffalo TeraStation TS4200D User Manual Download Page 11

11

into a USB 2.0 port, move the boot switch to the USB position, and press the power button.

14 

UPS Port

Connect to a UPS.

15 

USB 3.0 Port

Compatible Buffalo USB 3.0 hard drives can be connected. USB hubs are not supported.

16 

USB 2.0 Port

Compatible Buffalo USB hard drives, USB flash drives, digital cameras, and USB UPS connection can be connected. 
USB hubs are not supported.

17 

LAN Port 1

Use an Ethernet cable to connect this port to your network.

18 

LAN Port 2

This second Ethernet port may be used for network redundancy or backup. You may connect a second TeraStation 
directly to this port for backup.

19 

Power Connector

Use the included power cable to connect to an UPS, surge protector, or outlet.

20 

Fan

Do not block the fan.

21 

Anti-Theft Security Slot

Use this slot to secure your TeraStation with a cable lock (not included).

22 

Link LED

Glows orange when the unit is connected to a network.

23 

Act LED

This LED shows network activity. It blinks orange when the TeraStation is accessed over the network.

Installation

1 

Insert the TeraNavigator CD into your computer. TeraNavigator will launch.

2 

Click 

Begin Installation

.

Summary of Contents for TeraStation TS4200D























































































































































Reviews:

No comments