7
To secure the power cable, insert it into the slot as shown.
11
Disk 1 Error LED (LS420D, LS420DS, and LS421DE only)
If there is a hard drive error on drive 1, this LED will light.
12
Disk 2 Error LED (LS420D, LS420DS, and LS421DE only)
If there is a hard drive error on drive 2, this LED will light.
13
USB 3.0 Port (LS421DE only)
Compatible Buffalo USB 3.0 hard drives can be connected. USB hubs are not supported.
Notes:
•
The USB 3.0 port doesn't support isochronous transfers when the USB device server is enabled.
•
With Mac OS, only the USB 2.0 ports work with the USB device server.
14
Link and Activity LED
This LED shows network activity. It blinks green when the LinkStation is accessed over the network.
15
Not in use.
Changing Admin Password and Adding a Shared Folder
After initial setup, changing your password and creating other shared folders are recommended.
1
Double-click the
icon to start NAS Navigator2.
2
Right-click on your LinkStation's icon and select
Settings
. On the Mac, select the LinkStation's icon while
holding down the control key, then select
Settings
.
