66
On days other than Wednesday, normal operation begins at 9:00 and the unit goes into sleep mode at 18:00.
On Wednesday, the unit goes into sleep mode at 20:00.
Example 3:
If running at the current time of 10:00 Wednesday
Timer 1: Daily 9:00–18:00
Timer 2: Wednesday 10:00–3:00 the next day
Timer 3: Not used
On days other than Wednesday, normal operation begins at 9:00 and the unit goes into sleep mode at 18:00.
On Wednesday, normal operation begins at 9:00 and the unit goes into sleep mode at 1:00 the next day.
Example 4:
When running at a current time of 10:00 Wednesday
Timer 1: Daily 9:00–18:00
Timer 2: Wednesday 7:30–22:00
Timer 3: Not used
On days other than Wednesday, normal operation begins at 9:00 and the unit goes into sleep mode at 18:00.
On Wednesday, normal operation begins at 7:30 and the unit goes into sleep mode at 22:00.
•
To turn on the LinkStation before the wake-up time when it is in sleep mode, press the function button.
Encrypting Data Transmission
Encrypting Settings Data
All communication with Settings can use SSL encryption if you access Settings through https://.
Encrypting FTP Transfer Data
You can encrypt passwords and files using SSL/TLS for secure FTP communication. First, open a shared folder's
settings and click
Edit
; under "LAN Protocol Support", check "FTP" and click
OK
. Enable SSL security in the setup
screen for your FTP client. The procedure depends on the FTP client software.
SSL Encryption
SSL is a cryptographic protocol for communication security and data confidentiality over the Internet. To use
SSL, you will need a certificate and a key. These are available from web hosting services and many private privacy
providers.
Configuring SSL
To enter or update a server certificate and private key for SSL, following this procedure.
1
Navigate to
Management
-
SSL
.
2
Enter or browse to the locations of the key and certificate, then click
Import
.
UPS (Uninterruptible Power Supply)
If a UPS (sold separately) is attached, the LinkStation can be automatically shut down for protecting data in the
event of a power outage.
1
Plug the power cable of the UPS to a wall socket.
2
Connect the AC cable of the LinkStation to the UPS.
