2
Burner installation
26
Installation and maintenance instructions Logano GE315 • Issue 02/2006
We reserve the right to make any changes due to technical modifications.
2.7.2
Thermal insulation
z
The thermal insulation supplied corresponds to the
respective boiler size (Table 1). Arrange the thermal
insulation according to the Fig. 32 illustration shown
on the boiler block.
z
At the lower boiler area push the insulating material
under the boiler block. The boiler section feet are set
into the cut-outs of the thermal insulation.
Tab. 1:Thermal insulation dimensions
z
Slide the thermal insulation for the rear section
(Fig. 33,
) onto the flue gas coupling. Ensure
that the cut-out for the boiler flow and return points
upwards.
z
Hook the thermal insulation for the rear section into
the upper cross support bracket using two spring
hooks (Fig. 33,
Item 1
).
z
Close the gap below the flue gas coupling with spring
hooks (Fig. 33,
Item 3
).
Boiler size
Boiler segments
L
105
5
840
140
6
1000
170
7
1160
200
8
1320
230
9
1480
Fig. 32
Thermal insulation
V:
Front (boiler front)
H:
Rear (boiler back)
Fig. 33
Installation of thermal insulation at the rear section
V
H
2
1
3
