Page 8
WARNING:
Failure to position the parts in accordance with these diagrams or
failure to use only parts specifically approved with this heater may result in property
damage or personal injury.
18 (Fiber)
24 (Fiber)
1
2
3
5
4
5
4
1
3
2
NEWER LOG SETS
MAY HAVE A TWO
(2) PIECE LOG.
LOG PLACEMENT FOR MODEL 24 (FIBER) LOG SETS (See Figure 3.)
1) Front log #1 has two notches in bottom of log. Place the log so the notches are over the 3/4" x
3/4" square bar of each leg of burner base.
2) Place middle log #2 over front burner tube. There are alignment notches in each corner.
3) Rear log #3 has notches in both back corners. Place in the back log holders at the rear of the
burner base.
4) Place the big end of right top log #4 over pin in the middle of rear logs. The smaller end also
has a hole that places over the pin in the middle log.
5) Left top log #5 sits in notches on rear and middle logs.
Figure 3
Figure 2
Summary of Contents for CR18
Page 2: ......
Page 50: ...Page 48 Figure 12 SIT MILLIVOLT VALVE 18 24 BASE...
