Buchi E-800 Operation Manual Download Page 64

Page: 64 / 88

7 | Performing an extraction

Büchi Labortechnik AG

64/88

Operation Manual UniversalExtractor E-800

Performing an extraction

7.1

Preparing the instrument for an extraction

Precondition:

All commissioning operations have been completed. See Chapter 5 "Installation",
page 30

Make sure that the tank bottle is empty and installed. See Chapter 5.15
"Preparing the tank bottle", page 42

Make sure that no defective sealings or glass parts are used.

Switch the

On/Off

master switch to On.

The instrument is starting up.

7.1.1

Putting the glass sample tube with frit in the extraction glass chamber

NOTE

Instead of glass sample tube with frit it is possible to insert a thimble.

Put the holder for the glass sample tube with
frit into the extraction chamber.

Put the glass sample tube with frit into the
holder in the extraction chamber.

Summary of Contents for E-800

























































































Search results

Summary of Contents for E-800

Reviews:

Related manuals for E-800

Brands by name

Popular brands

Buchi E-800, Operation Manual

Search results

Summary of Contents for E-800

Reviews:

Related manuals for E-800

Brands by name

Popular brands