Buchi E-800 Operation Manual Download Page 33

Page: 33 / 88

Büchi Labortechnik AG

Installation | 5

Operation Manual UniversalExtractor E-800

33/88

Make sure that the solvent collector circuit is
complete. See Chapter 11.1 "Schematics",
page 79

5.7

Connecting the coolant tubes to the condenser tank bottle

Precondition:

Make sure that the instrument is not
connected to the power supply.

Install the inlet tube onto the connection
marked CW TANK OUT.

Attach the inlet tube in place with a hose clip.

Install the drain tube onto the connection
marked CW TANK IN.

Attach the drain tube in place with a hose clip.

Attach the inlet tube onto the connection
marked CW IN .

Attach the drain tube onto the connection
marked CW OUT.

Make sure that the solvent collector circuit is
complete. See Chapter 11.1 "Schematics",
page 79

5.8

Connecting inert gas (option)

5.8.1

Connecting inert gas to the instrument (option)

Precondition:

Make sure that the instrument is not
connected to the power supply.

Attach the inert gas tube onto the connection
marked INERT.

Summary of Contents for E-800

























































































Search results

Summary of Contents for E-800

Reviews:

Related manuals for E-800

Brands by name

Popular brands

Buchi E-800, Operation Manual

Search results

Summary of Contents for E-800

Reviews:

Related manuals for E-800

Brands by name

Popular brands