C
−
LRV lift control valve
Operating controls and indicators
300−I−9010212−E−10/08.08
Removing the old version:
7.
Exit and close all programmes
8.
Remove the old version of WinDelta32 (refer to the Windows help
for information about how to remove a programme)
Installing the new version (the following steps may take a few minutes):
1.
Navigate to the installation file
Install_WinDelta32_1pXX_EN.exe
(XX = programme version) either by clicking the Windows
Start
but-
ton and selecting
Run
then
Browse
, or by using the Windows Ex-
plorer
2.
Double−click the installation file
Install_WinDelta32_1pXX_EN.exe
.
After a few moments, an installation dialog will be displayed.
3.
Click the button
Next
(or Install / Finish) until the installation is ter-
minated. A shortcut will automatically be placed on the desktop.
Configuring WinDelta32:
1.
Start the new programme
2.
To determine the serial port used for data communication between
the WinDelta32 programme (PC) and DELCON (electronics card),
in the menu
Options / Configuration
, call up the
Serial Port
page,
select the port you wrote down or a port from the list of available
ports and check the box
Default
in order to store the current set-
tings.
3.
Open the window
Curves / Collect
. If the temporary file
Data-
File.dat
includes more than 200 curves, these curves will be saved
automatically to a file named
YYMMDDHHMM.dat
(with YY=Year /
MM=Month / DD=Day / HH=Hour / MM=Minute) and a new empty
file will be opened.
