btsr MATRIX CUBE, Operating Manual

Page: 77 / 129

Style Programming
MATRIX CUBE - 61 -
TLOW ( % ): minimum tension value, below which an
alarm will be generated (-1 to -100 % of the setpoint
value) (OFF = control disabled).
THIGH ( % ): maximum tension value, below which an
alarm will be generated (1 to 100 % of the setpoint
value) (OFF = control disabled).
TLOW TIME ( s ): running time with tension
≤
TLOW
after which an alarm will be generated (1 to 60 s).
THIGH TIME ( s ): running time with tension
≥
THIGH
after which an alarm will be generated (1 to 60 s).
MOTION CTRL : see the description provided above.
ADV window for MATRIX CUBE creel type
On the ADV window you may setup the regulation
algorithm (system gain) ( REGULATION GAIN 0.1 to
10.0 – default 1.0) and the IS3F/HTP sensor
parameters (
FSTART , FSTOP , SENS and DELAY)
Once you have setup all parameters within the
SETPOINT , TEN.CTRL , ADV windows.
ADV window for MATRIX CUBE 2 creel type
On the ADV window you may setup the regulation
algorithm (system gain) ( REGULATION GAIN 0.1 to
10.0 – default 1.0) and the IS3F/HTP sensor
parameters (
SENSITIVITY , SWITCH TIME (ms) ,
START COUNT, SWITCH COUNT and DELAY
CTRL (s))
Once you have setup all parameters within the
SETPOINT , TEN.CTRL , ADV windows.
SAVE to save the set parameters and return to section
setting screen.